How to fix brother printer “If HL 2240 error light is blinking”

Brother Printers are one of the best and hi-tech devices in all over the world for its ultra-edging features. It makes printing more comfortable and convenient for both users, individual and commercial. But, the fact is, like other printing devices it also faces some technical issues. It becomes harsh when you face errors like HL 2240 Error Light with your printing machine. Here at printersupportsnumber some practical solutions are given below to relieve you from this kind of errors.

Resolve Brother Printer HL 2240 Error Light: -

Here are some steps that will help you to get rid your printer of all bugs.

Reset Toner Cartridge

Mostly it is seen that the Brother Printer HL-2240 error stop the resetting of the device after you put up a new cartridge. In such a case the error leaves up with the messages such as ‘Toner low’ or ‘Toner empty.’ Though, to remove this issue, do a physical reset and follow the steps given below:

• Firstly, turn off the printing machine and open the front cover. Again while turning on the printing device again, make sure that you hold the ‘Go’ button.
• Once the Toner error LED’s are on, release the Go button. Once you leave the Go button all the LEDs will turn off.
• Now, press the ‘Go’ button twice. All the LEDs should turn on. Close the front cover and find whether the error LED is blinking.

Reset Drum

The printer page counts needs to be retuned once you change a DR420/ DR2200 drum in the HL-2240. However, retuning will turn off the drum warning light of the printing device. For doing so, you can open the front cover. Press the Go button until all the four LED’s turn on. Once the LED’s are on, close the front cover and release the GO button. If the process does not work, then proceed with the next one.

Change the Toner Cartridge

• To change the Toner cartridge, firstly make sure that the device is on. Then slowly open the front cover without applying any pressure. Now remove the drum unit and the toner cartridge from the machine.
• Take the toner cartridge out of the drum by pushing down the green lock lever. Wait, until you hear the lock while placing up the new toner cartridge into the drum unit. Be careful while putting the toner cartridge otherwise it will separate the drum unit.
• Smoothly slide the green tab from left to right and vice versa numerous times, clean up the corona wire inside the drum.

Print Test Page

For this procedure, make sure that you turn off the printing machine. While the device is getting on, hold the Go button. Once you hold on the Go button, the Toner, Drum and Error LED’s will turn on. Again press the Go button and you will find that the printer starts printing the test page.

Are you still facing issues after trying all the above solutions? Well, in such case give us the opportunity to deal with the error. In our expert team we have experienced and skillful professionals. They are expert in resolving these technical problems of printers. To get quick and simple solution regarding Brother Printer errors, you can Call us on our Brother printer Support number. We are available 24*7 for assisting our clients.